Wi-Fi 6

What is 802.11ax Wi-Fi?

Wi-Fi experiences a seismic change approximately every five years – and Wi-Fi 6 (802.11ax) is the latest generation of Wi-Fi that bridges the performance gap towards ten gigabit speeds. The new Wi-Fi standard will deliver faster network performance, connect more devices simultaneously and transition Wi-Fi from a ‘best-effort’ endeavor to a deterministic wireless technology that has become the de-facto medium for internet connectivity. With an expected four-fold capacity increase over its 802.11ac Wave 2 predecessor, Wi-Fi 6 (802.11ax) deployed in dense device environments will support higher service-level agreements (SLAs) to more concurrently connected users and devices with more diverse usage profiles.


The Wi-Fi 6 (802.11ax) certification marks a new evolution in delivery of greater Wi-Fi connectivity. This certification program validates a new set of features and capabilities that offer a range of technical enhancements to optimize spectral efficiency, increase throughput and reduce power consumption. These include:


Orthogonal frequency-division multiple access (OFDMA) and multi-user multiple-in multiple-out (MU-MIMO) are techniques that increase reliability and efficiency in the unlicensed Wi-Fi spectrum. In contrast to previous generations of Wi-Fi, OFDMA enables Wi-Fi to become deterministic, as devices consistently receive more attention with minimal contention. This helps stabilize Wi-Fi performance, especially in higher density environments.

Each Wi-Fi channel is divided into smaller sub-channels known as Resource Units. The AP decides how to allocate the sub-channels, as each individual RU (or sub-channel) can be addressed to different clients that are serviced simultaneously. This technique improves the average throughput (per user) by creating a narrower, albeit dedicated sub-channel. Moreover, OFDMA boosts spectral efficiency and reduces latency, while supporting heterogeneous users (i.e., IM, email or light web browsing versus large downloads).

It is important to note that OFDMA and MU-MIMO provide complementary techniques to concurrently serve multiple users. More specifically, OFDMA is best utilized when multiple connections transmit limited amounts of data. OFDMA which is effective at all ranges – close, medium and far – offers lower latency and can be used to mitigate OBSS interference issues. Meanwhile, MU-MIMO best serves multiple user with full buffer traffic and is most effective at close-to mid-range.

Uplink MU-MIMO

With Wi-Fi 6 (802.11ax), OFDMA and MU-MIMO are supported in downlink (from AP to stations) and uplink (from stations to AP). It should be noted that the AP schedules the transmissions in both directions. This contrasts with pre-Wi-Fi 6 (802.11ax) networks (especially in uplink direction), where resource allocation is contention-based, with individual stations making the decision to appropriate the medium and transmit data. As stations increase, so does contention.

Sub-carrier spacing and MAC/PHY enhancements

With Wi-Fi 6 (802.11ax), sub-carrier spacing is reduced, thereby enabling a 4X jump in the number of available data-tones and significantly increasing maximum PHY rates. Moreover, additional data tones help support multiple users in conjunction with OFDMA. Wi-Fi 6 (802.11ax) also optimizes spectral efficiency with more tones/channel, reduces overhead, bolsters outdoor operation and facilitates a quantum jump in highest achievable PHY rates. In addition, Wi-Fi 6 (802.11ax) APs maintains two separate network allocation vectors (NAVs) to prevent misbehavior and collisions. Last, but certainly not least, Wi-Fi 6 (802.11ax) features a 1024-QAM constellation (in contrast to 256-QAM for 11ac), enabling a 25% physical data rate increase that in combination with other Wi-Fi 6 (802.11ax) techniques offer up to 4x the capacity.

Target Wake Time

First introduced in the IEEE 802.11ah standard, target wake time (TWT) enables scheduled sleep and power-on (awake) times, along with pre-negotiated wake times between AP and clients to avoid on-the-air contention amongst client devices. This helps make air utilization more efficient and enhances the battery life of client devices.

“As part of our test bed, the Ruckus R750 access point validates other devices for Wi-Fi CERTIFIED 6 interoperability.”

VP of Marketing
Wi-Fi Alliance

Ruckus Networks R750 is the world’s first Wi-Fi CERTIFIEDTM 6 Access Point.

Read More

IDC Technology Spotlight Paper

Evaluating the New 802.11ax Wi-Fi Standard and What It Will Mean for Enterprises.

Read More

5 Problems That Impact Wi-Fi Performance In Dense Areas

Ruckus' solutions to these problems.

Read more

Ruckus Blog


802.11ax fundamentals: Target Wake Time (TWT)

Dennis Huang

Read More

Let’s talk about Wi-Fi and the 2022 World Cup

Ruckus Networks

Read More

Connecting smart cities with 802.11ax APs

Ruckus Networks

Read More

Ruckus targets ultra-high-density Wi-Fi deployments with R730 AP

Dennis Huang

Read More

eSports Wi-Fi FTW!

Ruckus Networks

Read More